BIOSWEEP BASE TREATMENT – FAQ
A: Certified BIOSWEEP® Cleveland Service Providers utilize proprietary BIOSWEEP® Cleveland equipment for surface decontamination and odor, germ and bacteria removal. BIOSWEEP® Cleveland deploys a proven technology called photo-catalytic oxidation (PCO) to produce simultaneous, interrelated forms of oxidation to eradicate airborne organic contaminants. This process is called BIOSWEEP® Cleveland BASE TREATMENT. These vapor compounds are unsurpassed in field applications for their penetrating oxidative power to remove virtually any embedded or persistent contaminant and odor.
The BIOSWEEP® Cleveland BASE TREATMENT is primarily used for air and surface contaminant destruction and odor removal. Virtually any odor or contaminant can be completely eradicated with BIOSWEEP® Cleveland BASE TREATMENT. Additionally, BIOSWEEP® Cleveland SURFACE DEFENSE provides additional long-lasting antibacterial protection. (See BIOSWEEP® Cleveland SURFACE DEFENSE FAQ)
Yes, BIOSWEEP® Cleveland BASE TREATMENT is the only process that removes virtually any sort of cooking odors from a home or restaurant. A particular problem area stems from odors from cooking curry dishes. Curry oil is usually very difficult to remove but, with a special pre-treatment process specifically tailored to curry odors, experienced BIOSWEEP® Cleveland service technicians generally have excellent results in removing this odor as well.
Yes, any organic smell, including those of deceased animals or human waste, can be treated with BIOSWEEP® Cleveland BASE TREATMENT. In order to eliminate the odor, the original cause of the odor and any remaining organic material must be first removed prior to BIOSWEEP® Cleveland treatment.
A: After the existing mold has been physically removed by a certified mold technician, BIOSWEEP® Cleveland TREATMENT can eradicate any remaining particles in the air and on surrounding surfaces. Following BIOSWEEP® Cleveland TREATMENT, certified BIOSWEEP® Cleveland service technicians can apply an additional long-lasting BIOSWEEP® Cleveland SURFACE DEFENSE anti-microbial treatment to provide an ongoing bacterial shield to deter mold from returning.
A: After the existing mold has been physically removed by a certified mold technician, BIOSWEEP® Cleveland TREATMENT can eradicate any remaining particles in the air and on surrounding surfaces. Following BIOSWEEP TREATMENT, certified BIOSWEEP® Cleveland service technicians can apply an additional long-lasting BIOSWEEP® Cleveland SURFACE DEFENSE anti-microbial treatment to provide an ongoing bacterial shield to deter mold from returning.
A: Yes, BIOSWEEP® Cleveland BASE TREATMENT eradicates most animal odors including cat urine and skunk odor. Pre-treatment of the affected areas to remove the source of the odors may be required to ensure complete elimination of the offending odor.
Yes, BIOSWEEP® Cleveland BASE TREATMENT is perfect for contents restoration after a fire disaster. If clothes or cloth furniture have lingering odors due to smoke, BIOSWEEP® Cleveland BASE TREATMENT can remove them usually in one (1) treatment. Smoke odor removal is a specialty of BIOSWEEP® Cleveland Service Providers.
Yes, BIOSWEEP® Cleveland BASE TREATMENT is very effective at removing the residual odor effects of toxic fumes associated with gasoline and diesel fuel spills. The organic compounds in fuel oils are broken down to non-volatile compounds during the process. Porous materials (i.e. concrete), however, will have to be treated with an enzyme to expedite the BIOSWEEP® Cleveland process breakdown. Please ask your local BIOSWEEP® Cleveland service provider about any necessary pre-treatments prior to the BIOSWEEP® Cleveland BASE TREATMENT.
No, BIOSWEEP® Cleveland BASE TREATMENT equipment does not use any chemicals – simply the existing oxygen and hydrogen in the air! BIOSWEEP® Cleveland service providers do have a line of proprietary accessory chemicals for use in certain worst case scenarios such as fatalities or animal waste. However, these chemicals are supplemental, not part of BIOSWEEP® Cleveland primary technology and typically not used. BIOSWEEP® Cleveland BASE TREATMENT and BIOSWEEP® Cleveland SURFACE DEFENSE are 100% environmentally safe!
No, the BIOSWEEP® Cleveland BASE TREATMENT is completely compatible with virtually all common materials. BIOSWEEP® Cleveland BASE TREATMENT will not bleach or harm carpet, upholstery or fabrics when properly applied by certified BIOSWEEP® Cleveland service technicians. In most cases, the BIOSWEEP® Cleveland SURFACE DEFENSE anti-microbial defense application also will not discolor materials, however, a certified BIOSWEEP® Cleveland service technician may test any area if needed. (Ask your local BIOSWEEP® Cleveland Service Provider for more information on specific materials.)
BIOSWEEP® Cleveland BASE TREATMENT can treat most indoor environments in less than a day. depending upon several factors including indoor environment conditions, odor or contaminant, floor plan and cubic air space (room size). Most vehicles can be easily treated in 2 hours. BIOSWEEP® Cleveland BASE TREATMENT can reduce deodorization time as much as ninety-percent (90%) compared to other technologies and systems.
Yes, we guarantee complete removal of the existing organic odor. However, other odors could be introduced after the BIOSWEEP® Cleveland BASE TREATMENT or there could be additional non-organic odors underlying the main offending odor. We cannot guarantee odor removal if the customer continues to participate in activities that cause the offending odor. (Please see your local BIOSWEEP® Cleveland Service Provider for details.)
Most treatment areas can be safely re-entered within 45 minutes to 1 hour after completion.
The treatment process, while removing noxious odors, produces a pleasant “clean scent” smell that lingers briefly and gradually diminishes within 24 – 48 hours depending upon conditions.
A treatment area can be as small as a car or structures well over 10,000 square feet. The time it takes to treat an area depends on how many BIOSWEEP® Cleveland BASE TREATMENT units are used. The quantity of BIOSWEEP® Cleveland BASE TREATMENT needed is dependent upon several factors such as temperature, humidity, contaminant source and severity, floor plan, and cubic space. (Please ask your local BIOSWEEP® Cleveland Service Provider for details in estimating your treatment area.)
No. BIOSWEEP® Cleveland can ONLY be safely operated in vacant or unoccupied spaces. BIOSWEEP® Cleveland CANNOT be operated when humans or pets are present. Operators must wear NIOSH-approved half- or full-face piece respirators with NIOSH approved P100/Organic Vapor/Acid Gas cartridges when working around or exposed to the BIOSWEEP® Cleveland BASE TREATMENT process.
No, BIOSWEEP® Cleveland BASE TREATMENT is not considered an ozone generator. The units produce purified oxygen and hydrogen peroxide within the treatment chamber. These oxyradicals are exported from the air filtration units to attack contaminants in the air and on exposed surfaces. These units are at least TEN TIMES more powerful than most commercial ozone generators. See comparison chart here.
Any space treated with the BASE treatment is completely safe for occupation an hour after the BASE process is complete, as the gases generated have a very short life cycle (at most, 30-45 minutes once exposed to our atmosphere). The residual treatment odor that one may smell is actually extremely low levels (parts per billion) of off-gassing by the porous materials in the room such as carpet, furniture or ceiling tile. This “potpourri” of compounds form this residual odor, which is well below the acceptable NIOSH standards and carries no health risks. To speed up the dissipation of the residual odor, one may open windows/doors and/or use fans to create air movement. Where applicable, removing a few ceiling tiles may also speed up the dissipation process when there is a pocket above the drop ceiling that is not able to vent very efficiently.
BIOSWEEP® Cleveland BASE TREATMENT can reduce deodorization time as much as ninety percent (90%) as compared to simple ozone generators or other commercial deodorization and decontamination service providers.
One BIOSWEEP® Cleveland BASE TREATMENT will typically remove all odors caused by organic materials. In the unlikely event that odors do linger, BIOSWEEP® Cleveland Service Providers will typically perform a second treatment at no extra charge. Our 100% guarantee assures our customers that the BIOSWEEP® Cleveland system will be successful in resolving their issue. (Please see your local BIOSWEEP® Cleveland Service Provider for details.)
When an odor rarely returns following a BIOSWEEP® Cleveland BASE TREATMENT, there are particular reasons why. BIOSWEEP® Cleveland certified service technicians are highly trained to identify odors with the potential of recurrence and can identify the odor producers so permanent odor removal can be achieved. If BIOSWEEP® Cleveland is unable to remove the offending odor in one or more applications, we offer a 100% guarantee.(Please see your local BIOSWEEP® Cleveland Service Provider for details.)
BIOSWEEP® Cleveland BASE TREATMENT produces both purified trivalent oxygen and hydrogen peroxide. The properties that make ozone and hydrogen peroxide powerful cleaners and disinfectants also make them dangerous to living tissues. The same chemical properties that allow high concentrations of these oxyradicals to react with organic material outside the body give them the ability to react with similar organic material that makes up the body and potentially cause temporary harmful health consequences. For this reason we require the temporary evacuation of all treatment areas for the short duration of the treatment period. BIOSWEEP® Cleveland service technicians use highly-sensitive sensors to verify that application areas are absolutely safe for people and pets to reoccupy before allowing re-entry.
BIOSWEEP® Cleveland Service Providers use sophisticated and highly-sensitive vapor monitoring equipment and procedures to ensure that no one re-enters treated areas until it is absolutely safe to do so.
Yes, BIOSWEEP® Cleveland BASE TREATMENT will remove formaldehyde in the air. Since formaldehyde is a volatile organic compound, BIOSWEEP® Cleveland BASE TREATMENT is very effective at eradicating this
BIOSWEEP SURFACE DEFENSE TREATMENT – FAQ
Our BIOSWEEP® Cleveland SURFACE DEFENSE Treatment services utilizes an antimicrobial solution that binds at the molecular level with any treated substrate rendering the entire surface antimicrobial. It creates a physical barrier of carbon chains that are pointed up like swords, penetrating any microbe which lands on the treated surface. Thus, it will prohibit any bacteria, viruses or mold from growing on the treated surface.
For our BIOSWEEP® Cleveland SURFACE DEFENSE treatment to work effectively, all surfaces should be relatively clean through normal, routine cleaning practices. There should be no visible dust or debris on the surface prior to treatment. If so, we recommend using a damp microfiber cloth to wipe down surfaces that may appear dirty with dust or lint. In addition, BIOSWEEP® Cleveland BASE TREATMENT should be considered prior to a BIOSWEEP® Cleveland SURFACE DEFENSE treatment in order to eradicate any airborne germs or bacteria that may land on any surface areas.
The antimicrobial is rapidly applied using a specialized industrial sprayer – so the process is quite fast. Once applied, the antimicrobial coating air dries within an hour and the treated areas can be then reoccupied.
Yes, however it may not be necessary to use as much cleaning product or allow replacement with less costly or more environmentally responsible alternatives
No, the BIOSWEEP® Cleveland SURFACE DEFENSE Treatment antimicrobial will not wash off the treated surface. It can withstand temperatures up to 257º F and resist all organic solvents, strong acids and bases. It will begin to lose its maximum potency within 12 months, however, and should be re-applied during months 10 – 12 to assure ongoing protection.
No problem. While BIOSWEEP® Cleveland Service Providers are experts at deodorizing and decontaminating large areas that employees and customers typically come in contact with, they will apply it to the highest priority areas of your choosing, such as restrooms, waiting rooms, exam rooms, cafeterias, etc. Your local BIOSWEEP® Cleveland Service Provider can provide recommendations on areas commonly treated.
The BIOSWEEP® Cleveland SURFACE DEFENSE Treatment antimicrobial solution has been clinically shown to eradicate MRSA and make the applied surface resistant to it 24/7 for up to 365 days.
Yes, the antimicrobial product used in BIOSWEEP® Cleveland SURFACE DEFENSE treatment is EPA registered and meets all Dept. of Defense (DoD) and US Dept. of Agriculture (USDA) standards. It is even approved for use in food preparation areas.
BIOSWEEP® Cleveland Service Providers use testing equipment known as ATP technology to real-time test for living biological matter on site in predetermined or random locations to ensure that your treated spaces are clean according to acceptable industry standards and levels.